Blazon

	is a blue liquid, containing 100% non-ionic polymeric colorant
	is patented, non-staining colorant technology
	is non-hazardous
	is not a dye, and will not permanently stain skin

Blazon Spray Pattern Indicator is a non-staining blue liquid colorant designed to be used with pesticide, fertilizer and/or plant growth regulator tank mixes. Blazon provides visual assurance that these solutions are uniformly applied, with minimum overlap and no missed areas. Blazon helps to alert the operator to improper equipment operation - the blue color immediately indicates line and/or connection leaks and clogged nozzles. Blazon is an excellent safety tool - the blue color provides real time feedback in the event of operator exposure to the solution.

Package Availability
Blazon Blue 2 x 2.5 gal. Cont./cs. 40lbs/case
Blazon Green 4 x 1 gal. Cont./cs. 4 gals/cas

Recommended Application Guidelines and Rates

Experience will be the best determinant of the rates required for your application, but the following rates are typically used:

Blazon Blue Application Rate
Equipment	Application	Rate
Boom	Dormant turf, greens, short cut fairways	8-14 oz./acre
Boom	Longer cut fairways, roughs	16-24 oz./acre
Hand Gun	High volume applications (>2 gal. /1000 sq. ft.)	24-32 oz./acre
Hand Gun	Low volume applications (1-2 gal. /1000 sq. ft.)	18-24 oz./acre
Back Pack	Spot spraying or small area coverage w/mini boom	1 oz./gallon of solution
Blazon Green Application Rate
Boom or Hand Gun	Dormant turf, greens, fairways, roughs	32-43 oz./acre

Your rates may vary based on conditions in your area. Therefore, it is recommended that you begin at the higher rates and reduce with each successive tank to a color that is just visible to the applicator. Fill tank halfway, then add the color. Minimal agitation is required. Avoid contact or spills with the concentrate as it is a highly colored solution.

Unique Features

Colorant: Blazon is a water soluble polymeric colorant, not a dye - it is NON-STAINING to skin, clothing and equipment.

Inert: Pesticides are active at very low rates, and even a small amount of interference from a dye could affect the entire application. Blazon is an inert product at all pH's and has been university tested to prove compatibility.

No heavy metals: Blazon's unique manufacturing process does not require the use of heavy metals. None are used so there are none in the final product.

Highly visible: The product is designed to be discreet but highly visible to the trained eye. Even on thick foliage or bare ground, the evidence of chemical application is provided by the bright colorant.

Site last updated: 01/17/2008